R710 ESXi Update PERC 6/i Firmware
Inherited a few R710s. All running ESXi 6.0. iDRAC6 Express on all with current 2.9 firmware.. OMSA running as on all as well.Would like to get the 6.3.3 PERC firmware update loaded to remove the...
View ArticlePoweredge T130 Bios update failed
During a Bios upgrade on a T130 from version 1.02 to 2.32 the server crashed 23 seconds into the upgrade.Now the server stuks with bios loading drivers when booting.Is there some way to load a fresh...
View ArticleClik here to view.
Failed Disk Replaced But New Disk Not Rebuilding
We have RAID 10 on PowerEdge R720 and one from the 8 disks failed. So we took out failed disk as usual and hotswapped with new disk but new disk is not rebuilding. In the Open Manage Server Admin, we...
View ArticleClik here to view.
PowerEdge 2950 memory issue
Hello,We have upgraded the memory in two of our PowerEdge 2950's to have 32GB, one of which is working fine, the other however isn't. As you can see from the screen shot below the server is seeing the...
View ArticleStacking 2 switches MXL 10/40G
Hi,We have configured a stack of 2 switches Dell MXL 10/40G by executins the following commands on each of them.Dell#show system stack-unit 0 stack-group Stack group...
View ArticleUpgrading R640 from SW to HW raid
We need to upgrade three R640s with the 8 bay chassis (321-BBKI) from SW to HW raid. Would a PERC H730 (405-AAEJ) with the proper cable work? If so, what would be the spare part number of the cable?...
View ArticleDell F10 4810 logs=IP-4-ADDRMOVE...
Hi,One of our 4810 is logging a lot of theses:%STKUNIT0-M:CP %ARPMGR-6-MAC_CHANGE: IP-4-ADDRMOVE: IP address 10.0.200.88 is moved from MAC address 7c:d1:c3:dc:e0:a1 to MAC address...
View ArticleUnable to find Firmware Update for H200 Controller T710 Power Edge
I have a Dell Poweredge T710 that is showing an out of date firmware on the integrated PERC H200 controller. I went to dell's support website and downloaded the correct version of the update and when I...
View ArticleE1810 Hard Drive 3 Fault (T710)
Hi all,We have a T710 that is throwing a E1810 Hard Drive 3 fault. The server has been in place since before I was with the company, so I'm trying to make sense of my predecessors' work - I don't have...
View ArticleHDD in RAID-10 array stuck in rebuild status for weeks
Hi all,I'm reaching out to you all here since I simply cannot figure this one out using the normal web search methods that usually work. We had several HDD predictive failures and/or failures, and...
View Article